Lynx L30WD, User'S Manual & Installation Instructions

Page: 3 / 15

3
WARNING: ELECTRICAL GROUNDING
1. Warming drawer must be installed in accordance with the local electric code or, in the absence
of local codes, the latest edition of the National Electrical Code ANSI/NFPA No. 70, or the Cana-
dian Electrical Code CGA 1.6b 2005.
2. Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor appliance. This type
of outlet should be installed by a qualified electrician.
3. This warming drawer is equipped with a three prong (grounded) electric plug for your protection
against shock hazard and must be plugged directly into a properly grounded three prong outlet.
Never cut or remove the grounding prong from this plug.
4. Use only extension cords with a 3 prong grounding plug rated for the power of the equipment
and approved for outdoor use with a “WA” marking.
5. To protect against electric shock, do not immerse any part of the power cord, extension cord, or
any plugs in water or other liquids.
6. Unplug the warming drawer from the outlet before cleaning when not in use for extended peri-
ods. Allow the drawer to cool before putting on or taking off parts.
7. Do not use the warming drawer for purposes other than intended.
8. Do not operate the warming drawer with a damaged cord, plug or after the appliance malfunc-
tions, or has been damaged in any manner. Contact Lynx Customer Care for repairs.
Connection to AC
Installation requires and outdoor 120 VAC, 15 amp dedicated GFI protected outlet.
The warming drawer is rated as follows;
120 VAC, 60 Hz, 450 W, 4 AMP
Electrical Information