Ionic Series
User Manual
Lynx Pro Audio S.L
7
www.lynxproaudio.com
CONNECTORS AND CONNECTIONS
•
Normative
QB Series cabinets meet the following standards:
EN 55103-1:1996:
Electromagnetic compatibility. Product family standard for audio, video, audiovisual and
entertainment lighting control apparatus for professional use (-1 Emmision).
EN 55103-1:1996:
Electromagnetic compatibility. Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use. (-2 Immunity)
EN 60065:2002: Audio, video and similar electronic apparatus. Safety requirements.
•
Cable connection
In the following table you can see the maximum power of the cabinets and their nominal impedance.
Connector
Connections per box
Impedance
Power
NL4MP
±1
2
16 Ohms
80 W
NL4MP
±1/ ±2
1
2 x 8 Ohms
•
Connectors
The QB Series has a connection panel at the rear of the cabinet. This consists
of 2 internally bridged Neutrik NL4-MP connectors which apply no process
to the signal.
Note: If pins +-2 are not used they will still be internally bridged.
To power the cabinet use NL4 speakon connectors as shown in the following
diagram. Consult the ‘’Conection cable table’’ on previous page, under the
column ‘Speakon Connections’ to see which pins are used for each cabinet.
To connect the speakon follow the instructions in fig. 1
Insert the male speakon in its corresponding hole and turn right until it clicks. This fixes it safely and strongly and
helps stop it being pulled out by mistake. At the other end of the cable connect in the same way to the amplifier
channel.