LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com [email protected]
ionic-5CX
Fig 1
13
The confi guration panel
On the ionic subwoofers back panel you will see 3 buttons and an information screen, on which you can read the
established parameters and information such as amplifi cation module temperature, input signal level and name
of the current preset (Fig1). If changes are not made the display will automatically dim to save energy and avoid
unnecessary light in situations where light is not wanted. To re-activate the light simply press the OK button.
From the buttons below the display you can change the preset or select the input digital or analog. You can see
how to proceed on next page.
For ionic systems you can fi nd diff erent preset confi gurations in mono and stereo.
You can change the EQ of any preset but this change will not be saved in the preset, therefore as soon as you
change preset the EQ will be restarted. For example, if you want to use PRESET 1 but you prefer to change
the EQ, you connect the cabinet to your computer via USB or Ethernet and introduce the EQ changes using the
Online Control System software. Then you will be able to use your own EQ in PRESET 1 day after day only if you
don’t change to another preset. Once you change the preset the DSP restarts with the manufacturer settings. So
if you change from PRESET 1 to PRESET 2 and then come back to PRESET 1 you will fi nd that the PRESET 1
has the manufacturer’s EQ again.
Note:
You must apply the desired confi guration in each ionic subwoofer cabinet. Just select on the screen the cabinet
ionic-5CX with the preset confi guration desired.
This operation requires electrical power to work.
