Lynx greenMachine RFR 6000, Quick Reference, Page: 3 / 8

3
ASSEMBLING YOUR RACK FRAME CHASSIS:
ONE
green Machine
WITH ONE OR TWO POWER SUPPLIES
1
Step 1:
Step 2:
Assemble the 2x 19” mounting brackets (see page 6 ).
MB
Turn the greenMachine hardware
upside down and remove the 4x
feet from the bottom. Set the four
screws aside for later use.
PS
Step 3: Place the rack frame mounting
tray over the bottom of the
hardware and align the holes
in the mounting tray with the
holes where the feet were.
Use the 4x 3 mm countersunk
screws to attach the mounting
tray to the hardware.
Note: DO NOT use the screws that were used to attach the feet.
Step 4: Turn the greenMachine hardware in rack frame the correct way up. Insert
the power supplies (see page 7).