7
“Outputs“ Button
Select the “Outputs” button for monitoring based on
the output signals instead of the input signals.
Processing Configuration
Access and control the configuration menus by using the buttons to the immediate
left and top right of the display. You can also use the „Back“ button underneath the
rotary encoder.
The areas on the left and right hand side of the display show the active menu
items. Turn the rotary encoder to navigate between these different menu items. The
center part of the display will show a preview of the currently highlighted menu item.
Pushing the rotary encoder will enter the menu item.
System Settings
The “System” button to the right of the display will access the system settings
menu. Within this menu you can adjust the IP settings and panel configuration, reset
the processing parameters and/or system settings
(excluding IP settings), monitor the module’s health
parameters or assign presets to the Function Keys,
which are located on the far right of the control panel
next to the rotary push encoder.
Panel Lock
Pressing and holding the “Panel Lock” button for 3 seconds will lock the processing
and system settings for the local control panel. When locked, the “Panel Lock”
button will be illuminated red.
Press and hold the “Panel Lock” button for 3 seconds
to unlock.
All input and output monitoring functionalities are
available in lock mode.
