Reference Manual D VA 3120 Version1.1
Page 17
Adjustment Procedures
The modules configuration and gain/EQ settings
are set using combinations of the Dip Switch and
the two push buttons located on the module edge.
UP DN
4
DIP SWITCH
BUTTONS
ON
OFF
3
2
1
Setting functionality and calibration is interactive
and not an implicit switch setting process. The
adjustments are made through imbedded micro-
controller and settings stored on internal flash ram.
To simplify the configuration and setting of the
module a series of procedures has been defined to
make setting the module easier. These are:
•
Set Dual 1:4 or 1:8 Mode
•
Set Video Gain
•
Set Equalization
•
Set Unity Gain
•
Set Unity Equalization
These procedures capture most things you would
need to change or set on the module.
