Lynx C MX 5110, Reference Manual

Page: 30 / 36

Reference Manual C MX 5110 Version1.0
Page 30
Specifications
(C MX 5110)
Inputs (video)
Signal NTSC (M/N), PAL (B/D/G/H/I/M/N),
Y / Pr / Pb
Y / C (S-Video)
AC coupled, differential inputs
Input Impedance 75 Ohms, BNC
Outputs (Video)
Signal 2 x serial 4:2:2 SMPTE 259M-C (270 Mbps)
Output Level 0.8V p-p nom.
Jitter < 0.2UI
Connection BNC
Output Impedance
75 Ohms
Operating Modes (Video)
CCVS NTSC/ PAL decoding modes can be adjusted according
to the application. See remote adjustable parameters.
Parameter settings can be stored in remote operation.
CAV A/D conversion for CAV signals
YC A/D conversion for chroma / luma separated systems (S-
Video)
Test Built in Color Bars, Color Bars with red field,
EQ/PLL pathological, black flat field, blue flat field
Performance (Video)
Quantization 12 Bits for Luma and Chroma
Frequency Response ± 0,15 dB ...5,0 MHz, ± 0,2 dB ...5,5 MHz for Luma,
input LP off
Sampling 54 MHz (4 x oversampling)
Filters Selectable Luma/Chroma comb filters (5 line, adaptive),
various Luma / Chroma filters
S/N Ratio < -60 dB (unweighted to 5,75 MHz)
Inputs (Audio)
Signal 2x balanced analog stereo inputs
Connection 25 pin Sub D
Impedance 110 Ohms
Sampling 48kHz
Quantization 24 bit
Noise floor < -90dB (A-weighted)
Distortion < 0.002% @ 20Hz to 20kHz
Frequency response 0.1dB @ 20Hz to 20kHz
0 dB FS level + 12, 15, 18, 21, 24 dBu selectable
Outputs (Audio)
Signal 4 x SDI 4:2:2 SMPTE 259M-CD (270 / 360 Mbps)
with EDH
Connection BNC
Impedance 75
Ohms
Jitter < 0.2 UI