Reference Manual C AD 3110 -2 Version1.3
Page 9
Functional Diagram
Figure 1 below is the basic functional diagram for
the C AD 3110 MiniModule.
Figure 1- C AD 3110 Functional Diagram
Module Layout
Figure 2 shows the physical layout of the C AD 3110
MiniModule. Connections are made through
standard 75 Ohm BNC video connections. Module
configuration is set via a small dip-switch located
behind an access hole in the bottom of the
module.
If the module is being used in a stand alone
application then the optional power supply (R PS 1
E, R PS 1 U or R PS 3001-3) is required to power the
module (not shown)
