Lynx 9029000-20000, Pilot'S Manual, Page: 50 / 96

Lynx
®
NGT-9000
Pilot’s Guide 2-24
Operation
Map Elements
FIS-B weather products are overlaid on the map. The viewing of
weather products is controlled by the declutter range selected on the
Options Screen.
Tap to select Product overlaid map elements.
The selected map elements are highlighted in a yellow outline.
A tap of an empty area of the map de-selects the map element.
Only one map element can be selected at a time and may be
selected when panning is active or not.
The map is normally centered on the ownship symbol when
panning is not activated. When panning is active the viewing area
is repositioned to that selected by the pilot.
The directional ownship symbol is a white triangle that is a reference
point that corresponds to the ownship position.
The ownship symbol is a white circle if direction data is not
known.
The land masses are black. Bodies of water are dark blue. Depiction
of NEXRAD weather radar data is overlaid on the map. Map areas
where NEXRAD data has not been received are indicated using
a gray semi-transparent graphical overlay. This will cause land
masses to appear grey and water to appear light blue.
Country and State borders are solid light gray lines.
Major roads are depicted as solid gray lines for display ranges less
than or equal to 200 nm.
Cities are shown on the map in small white text centered on the
cities location. The display ranges of cities are dependent on the
size of the city as follows: Large and medium sized cities are shown
at less than or equal to 200 nm. Small cities are shown at less than
or equal to 50 nm.
The symbol for the different types of airports are described in Table
2-5. Soft surfaced airports are shown at display ranges less than or
equal to 10 nm. Hard surfaced small airports are shown at display
ranges less than or equal to 20 nm. Hard surfaced large airports
are shown at display ranges less than or equal to 200 nm.
Information Button (i)
The Information button is shown on the screen, located on the right
side of the screen, after a map element is selected. The button is
gray in color and labeled with an “i” icon. Tap the button to show the
Weather Map Text screen on the left side of the screen.
•
•
•
•
•
•
•
•
•
•
•
•