Installing External Battery Pack (Optional)
Installing battery pack:
For installing the battery pack, remove the cover of the external battery connector (step 1) and place it on the
lower position (step 2). Then screw the battery frame at the rear side (step 3) for placing the battery pack (step 4).
Please assure the battery pack is snapped into the external battery connector and external battery hook firmly
(step 5).
Step1
Step 2
Step 3
Step 4
Step 5
Installing Barcode Scanner and MSR Module:
The LYNX 10,4“ System provides barcode scanner and MSR functions for your optional selection, before installing
either of these two modules on the top side of the system, please remove the screws previously (illustrated in
the following graphics as indicated step 1).
To install the Barcode Scanner /MSR Module:
1.
Make
sure
the
system
is
turned
off.
Unscrew
four
screws
from
the
accessory
door
on
top
of
the
system.
2.
Mount
and
secure
the
Barcode/MSR
daughter
board
into
the
mainboard
with
screws.
3.
Insert
FFC
cable
of
barcode
scanner
into
connector
slot
or
Attach
the
MSR
cable
to
the
connectors
on
the
daughter
board.
4.
Screw
to
secure
the
Barcode
Scanner/MSR
onto
the
tablet.
