Set assembled dividers back onto glide
frame with mounting holes in dividers
and glide frame aligned.
Attach dividers to glide frame
using mounting screws.
Only gently tighten.
Remove assembled dividers from glide frame.
Move inner glide rails slightly forward as shown.
Mount glide frame into cabinet using
wood screws found in parts bag.
•The use of a power screwdriver
•Drill 4 starter holes using a 1/8”
diameter drill bit.
Recommended:
Install front
screws first
Base
mounting
hole
Move glide
rails forward
Set the assembled dividers and base
onto glide frame with mounting
holes aligned.
Check for adequate
cabinet & door clearance.
Adjust glide frame
position if needed.
2”
min.
50.8mm
2”
min.
50.8mm
2”
min.
50.8mm
Make sure arrows
are pointing to the
front of the cabinet
Alignment
Guide
Align glide frame in cabinet as shown using
alignment guide found in parts bag.
2”
min.
50.8mm
2”
min.
50.8mm
2”
min.
50.8mm
4
5
Aligning Glide Frame
Checking Cabinet Clearance
6
Mounting Glide Frame
Attach Dividers
7
© 2016 Lynk, Inc. 8241 Melrose Dr. Lenexa, KS 66214
LIMITED WARRANTY AND DISCLAIMER OF LIABILITY
The manufacturer warrants this product against defects in manufacturing and workmanship for a period of ninety (90) days from the date of purchase. For questions, call
(800) 733-5965 for customer service.
MANUFACTURER DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE WITH REGARD TO THE PRODUCT. IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, INJURY TO PERSON OR PROPERTY, OR ANY OTHER INCIDENTAL, CONSEQUENTIAL OR
PECUNIARY LOSS), OR FOR ATTORNEY’S FEES OR COSTS, ARISING OUT OF THE USE OR OPERATION OF THE PRODUCT.
If you have questions, please call 800-733-5965
430221 Roll Out Bakeware Organizer
R2
www.lynkinc.com
2
Turn screws
until just snug
