3)
TOP RAIL ASSEMBLY: ATTACH 5” TOP RAILS TO 5” FOOTBOARD. MAKE
SURE THE MACHINED
HOLES FACE INSIDE
.
4)
FOLLOW THE
STEPS BELOW
TO ATTACH THE RAILS.
5)
TOP RAIL ASSEMBLY: ALIGN PILOT HOLES AND ATTACH THE SUPPORT,
SEEN IN
FIGURE 1
. USE
5 – 1 5/8” SCREWS
TO ATTACH.
CIRCLED HOLE
FOR STEP #7 ONLY
.
6)
ATTACH THE TOP RAIL ASSEMBLY TO THE TOP BOARD OF HEADBOARD.
7)
USING THE CIRCLED HOLE IN
FIGURE 1
, FINISH SCREWING THE SUPPORT
INTO PLACE WITH
1 – 1 5/8” SCREW
.
8)
SPACE OUT SLATS EVENLY. SECURE THE FIRST, LAST, AND MIDDLE SLATS
USING
6 – 1 5/8” SCREWS
.
FIGURE 1
FINISHED ASSEMBLY
Page 2
Support
5” Top Rail
5” Footboard
5” Top Rail
