• After drying cycle is complete and the brass cases have COOLED,
it is important to check the cases for moisture. A simple way to do
this is to tap the case necks gently in palm of hand, if you notice any
moisture return the cases to the dryer for an additional drying cycle
• It is important NOT to reload any cases that may contain moisture
• To clean the trays, use warm water and a mild dish detergent and
soft sponge to gently wipe the trays clean
• To clean the base portions use a damp sponge to wipe any dirt away
from blower. DO NOT use excessive water or cleaning agents on
the base, this can cause damage to the dryer
WARRANTY/REPAIR POLICY
Your Lyman product has been produced under rigid standards of man-
ufacture and inspection. However, if your Lyman product is found to be
defective in material or workmanship within one year of delivery to the
first retail purchaser, we will repair or replace it without charge. If you
require service under this warranty, please return the complete item
along with a letter of explanation, including your complete name and
address, freight prepaid to the factory at the address listed below. Your
Lyman product will be repaired or replaced and returned to you within
30 days of our receipt. In making any return of a Lyman product to the
factory, please be sure it is packaged with proper care to protect it from
damage in transit.
We are sorry, but our warranty cannot apply to a defect which results
from misuse, abuse, neglect, accident or improper care, or if your
Lyman product has been altered or repaired by anyone other than fac-
tory personnel.
If the item is out of warranty and is in need of repairs, the Lyman prod-
uct should also be returned to the following address.
5
