PAGE 6
PAGE 5
1.Power indicator
:
Lights green when the power is switched on.
2.LED level meter
:
Indicates an output level.
3.Power switch
4.Master volume control:
Allows to control all inputs.
5.Bass control:
Allows to control the bass tone.
6.Treble control:
Allows to control the treble tone.
7. MIC1 volume control
8. MIC2 volume control
9. MIC3 volume control
10. AUX1 volume control
11. AUX2 volume control
12. MIC1 input:
this microphone input overrides other inputs.
1 2 3 4 5 6 7 8 9
1.Mute sensitivity control
•
Adjust the threshold level to activate
the MIC1 input priority function.
•
Turn to the position of “MIN”,
the MIC1 input has priority
over other inputs.
•
Turn to the position of “MAX”,
the MIC1 input misses priority
over other inputs.
2.Microphone 2 input
3.Microphone 3 input
4. AUX1 input
5. AUX2 input
6. Audio signal output
7. Speaker output terminals
• Do not use both the 4-16
Ω
,70V and 100V
terminals at the same time.
• Impedances indicated in the figures represent
the total speaker system (load) impedances
8. AC power inlet
9.Ventilation outlet
Rear Panel
Front Panel
Connection Illustration
4-16
Ω
output drives the speakers based on impedances.
•
70V/100V outputs drive the speakers with transformer.
•
• Do not use both the 4-16
Ω
,70V and 100V terminals at the same time.
• Impedances indicated in the figures represent the total speaker
system (load) impedances.
Mixer Amplifier
(70W/130W/260W/360W/500W)
MIXER AMPLIFIER
MIXER AMPLIFIER
