Lycoming TIO-540-A1A, Operator'S Manual

Page: 31 / 138

LYCOMING OPERATOR’S MANUAL SECTION 3
TIO-540 SERIES – ANGLE VALVE CYLINDER HEADS OPERATING INSTRUCTIONS
OIL – (All Models) (Cont.) –
Minimum
Oil Sump Capacity Maximum Safe Quantity
TIO-540 series except below 12 U.S. Quarts 2-3/4 U.S. Quarts
-V2AD 13 U.S. Quarts 4 U.S. Quarts
-W2A, -AJ1A 11 U.S. Quarts 4 U.S. Quarts
OPERATING CONDITIONS
Average *Oil Inlet Temperature
Ambient Air Desired Maximum
Above 60°F 180°F (82°C) 245°F (118°C)
30°F to 90°F 180°F (82°C) 245°F (118°C)
0°F to 70°F 170°F (77°C) 245°F (118°C)
Below 10°F 160°F (71°C) 245°F (118°C)
* - Engine oil temperature should not be below 140°F (60°C) during continuous operation.
OIL PRESSURE – PSI –
Normal Operation Maximum Minimum Idling Start and Warm-Up
All Models 95 55 25 115
FUEL PRESSURE – PSI –
MIN. MAX. IDLE MIN.
TIO-540-A1A, -A1B, -A2A, -A2B, -A2C
Inlet to fuel pump -2 65
Inlet to fuel injector 25 65 12
TIO-540-F2BD, -U2A
Inlet to fuel pump -2 65
Inlet to fuel injector 30 65 12
TIO-540-J2B, -J2BD, -N2BD, -R2AD
Inlet to fuel pump -2 65
Inlet to fuel injector 34 65 12
TIO-540-S1AD
Inlet to fuel pump -2 65
Inlet to fuel injector 25 65 12
TIO-540-AH1A, -V2AD
Inlet to fuel pump -2 65
Inlet to fuel injector 27 65 12
TIO-540-AJ1A
Inlet to fuel pump -2 55
Inlet to fuel injector 20 55 12
3-7