LYCAON BOARD
5
Connecting (Pre-paired with Board)
①
Charging the board: Connect the charger to the skateboard, it will enter into
charging state automatically with the red indicator light on.
When properly charging the light on the charger will turn red. When charging is
complete the light will turn green.
②
Charging the remote: When charging the remote control, the remote vibrates
shortly once. The screen displays the charging progress in real time.
Note: Either the remote or the board could not be operated or would not work in
the charging state.
1. Keep the remote and the board powered off.
2. Hold the power button of the board and that of the remote at the same time for
about 5 seconds.
3. The remote control will display a successful pairing prompt with two short
vibration and one long vibration when pairing is successful.
4. Speed, mileage unit and wheels diameter shall be selected when the remote got
paired with the board. Press Switch Button to switch options, and press
Power Button to confirm. Re-pairing remote allows to reset all the options.
5. After wheels diameter option is selected, the remote will enter into main
function interface.
Charging the Board and the Remote
