Installation method
1.Please mark the size of mounting hole of ceiling with the attached round
template to the speaker, and cut a round mounting hole on the ceiling (as
shown in the figure below, the hole diameter shall not exceed the range from
168 to 171mm).
Power
Line voltage
100 V
Terminal
Black-blue
2.5 W
5 W
Black-white
Black-yellow
10 W
4.Fix the parts on the ceiling,secure the rope is fixed to the hook (this step
is optional).
2
.
Unscrew the four screws with a screwdriver, and open the rear cover to
thread the audio broadcasting transmission line through the cover.
Note: Parts are required to buy separately.
5
.
Upturn the spring clips on both sides of the speaker and insert them into
the mounting hole, then let go them, push the speaker gently to insert it into
the ceiling (see the figure below). To avoid being injured by the spring, it is
recommended to wear work gloves when doing this step.
3.Choose an appropriate terminal wire according to the actual power (see the
table below for details), and connect with this terminal wire, then close the
rear cover, and screw on the screws.
Yellow
Blue
Input terminal
White
Output terminal
Black
---
com
Connection clamp
͐
Case of black---w
hite
connection
3
4
www.
lyintlcorp
.com
LY International Electronics Co., Ltd
