70V
140Ω
/ 70V
75Ω
/ 70V
285Ω
/
100
V
154Ω
/
100
V
100V
70V
100V
ED-35M
ED-65M
Connections
INPUT : Connect microphones or balanced line-level sources to mixer-amplier balanced inputs.
Set Gain volume accordingly. Connect unbalanced line-level signals to RCA input connectors.
Connections
Choose input wire and connectors
OUTPUT : Maintain proper polarity on output connectors.
For each output channel, connect the output EURO block terminals to the loudspeaker loads.
Use terminals marked COM and 4Ω / 8Ω for a loudspeaker load, or use terminals marked 70V,
100V, COM for constant-voltage speaker loads.
Oconnect the COM terminal to speaker negative(-) lead; connect one of the other terminals to
speaker po) lead.
The impedance and output voltage are same as following Table 2.1
[ Table 2.1 Output voltage and impedance ]
NOTE : Impedances indicated in the table 2.1 represent the total speaker system impedances.
Speaker connection is shown in Figure 2.2
[ Figure 2.2 How to connect speakers ]
Http://www.lyintlcorp.com/
Summary of Contents for ED-35M
Page 2: ......
Page 14: ...Block diagram Block diagram Http www lyintlcorp com ...
