5
Tape playing:
Press
or
to play the tape, after playing one side the system will rewind automatically to
play another side. Press
to have it stopped.
Record:
Only stop status, press
●
to record the tape. you can record from the CD, tuner, AUX or MIC.
adjust
the main volume controlling button, until LED element 3 (+6dB) and LED element 4 (+8dB) shall
flash
.You can not record if tape is protected.
4.
Using External Signal
Press key
AUX
for selecting external program from
AUX
port on rear panel.
5.
Using Microphone
Volume down the
Microphone Volume
to avoid strong vibration when inserts a
Mic
rophone.
Insert the Microphone into socket
MIC1
or
MIC2
with a 6.35
mm
plug, and turn the relative
Volume
knob in a moderate
standard to avoid any damage.
MIC1
have such a priority that when it is sound all others signal that is playing has to give
way to it. This
MUTE
function is for emergent speaking. We can also adjust the suppressing level with
MUTE LEVEL
on the rear panel.
6.
Built-in Chime
Pressing
key
CHIME
and melody
‘ 1 3 5
i ’
is to be played with the priority function same as
MIC1
. We can also tune
the volume of it by
CHIME
controller on the rear panel.
6. Remote control
Remote control device can operate it by timer through the cable.
PRECAUTIONS
1 Does not block ventilation holes.
2 The set should not be placed areas:
1) with poor ventilation.
2) exposed to direct sunlight.
3) with high ambient temperature or adjacent to heat generating equipment.
4) with high humidity or dust levels.
5) susceptible to vibration.
3 Make sure the power outlet conforms to the plug of the unit.
4 Do not use this unit if the electrical power cord is frayed or broken.
5 Always operate the unit with the AC ground wire connected to the electrical system ground
