background image

Warning 

The following basic requirements must be strictly observed, to avoid potential personal injury and 

equipment or property damages to you or any person nearby. The basic requirements include without 

limitation to the following: 

Power source/power cable 

• Please disconnect the device from power source by 
pulling the plug other than the power cord. Pulling the 
power cord may result in damages. 
• Please keep the power cord away from heat source. 
Do not overbend the power cord or place it anywhere 
it can be stepped on or may cause to trip. 
• This is connected to power source via the plug and 
any failure or danger occurs, the user can disconnect 
the device from power source by pulling out the plug 
out from the socket, therefore, it is required that the 
power socket should be located somewhere with easy 
access. 
• The device is not completely disconnected from 
power source when it is switched "OFF". For sake of 
safety, please disconnect the device from the socket if 
it is not in user. 

Positioning 

• Please disconnect the device from power source 
before relocating the device. 
• For avoiding deformation of panels and damages to 
internal components, please do NOT place the device 
where there is heavy dust or violent vibration, or 
where it is extremely cold or hot. 
• Please keep this device off water drops or splash or 
vase filled with water or any other articles of similar 
nature. 

Connection 

• Please disconnect other equipment from power 
source before they are connected to this product. 
Please tune volume to its minimum level before the 
device is powered ON or OFF. 
• All terminals on the device marked with 

  are live 

and  dangerous,  and  should  be  connected  by  trained 
personnel. 

When abnormal conditions are realized 

• Please disconnect the device from power source 

immediately in case the power cord is worn or 
damaged or if the sound is suddenly cut off or any 
abnormal odor or smoke comes out from the device, 
and then have the device inspected and repaired by 
professional personnel.

 

Precautions in Operation 

• Please do NOT insert any finger into any gap or 
opening of the device. 
• Please prevent foreign objects (paper, plastics or 
metal etc.) from being inserted or falling into any gap 
or opening of the device. In such case, please cut off 
power source immediately. 
• Please do NOT put the body or any heavy object on 
the device and do NOT operate the buttons or 
switches or connections with excessive force. 

Do NOT open 

• Please do NOT remove the cover of the equipment, 
otherwise you may get an electric shock. 
• Do NOT attempt to remove any internal component 
from the device, or to modify the equipment in 
whatever manner. In case of any abnormal condition, 
please stop using the device immediately and have it 
inspected and repaired by professional personnel. 

                     

   

Other Precautions 

• Our company shall not be responsible for data loss 
or damages due to improper use of unauthorized 
modification to the device. 

• The images and screen display in this Manual are 

only  for  description  and  may  be  different  from 

screen  images  in  actual  operation.  The  screen 

display depends on the product.

Summary of Contents for M-2588

















Reviews: