7. Camera direction set button (up, down, left, right)
8. Reset button (delete all the pre-setting spot)
9. Save button (save the pre-setting spot)
10. USB connection interface to PC
11. Matrix
：
Connecting to another video matrix
12.
PC CONNECTOR: Connect this socket to your computer to setup the software function.
13.
CAMERA CONTROL CONNECTOR RS232 and RS-422
If you use dome in place of camera you can control pan and tilt move directly from software.Connect
this socket to the control connector of domes.
Note : To know connections, read the user manual of the dome.
14. Data port (connect the conference main unit)
15. Power supply
Connecting and operation instruction for camera central processor
1. Connect the processor data port to conference main unit data port by Ethernet cable
2. Connect the high-speed dome date cable to RS232/RS422 interface (if the system has more than 1
camera, please use the multiple connecting)
3. Connect video processor to Matrix video device by RS232 cable, and then connect the high-speed
dome video cable (4 camera max) to each video input of the processor (V1, V2, V3, V4), the camera ID
should be same as the video in port
4.
Start to preset the video with video processor after u test other functions of the conference system.
Camera Preset
1.
Turn on the microphone which you want to preset.
2.
Please select the camera ID (VIDICON 1-4) on the front panel of video processor, if you select camera
1, the LED indicator of camera 1 will light and the system will switch to camera 1 image automatically.
3. Please debug the camera with direction set button (up, down, left, right) and Zoom +/-, please press
save key to save the setting after you got a good image of this preset microphone.
4. Please turn off the microphone after you finish set and turn on another microphone that you want preset.
(Note: there should be only one microphone on during preset), or you can set the system working mode
RS-422 (Green LED)
1-
TXD +
2-
TXD -
3-
RXD +
4-
RXD –
5-
GND
RS-232 Male (Red LED)
1.NC 6.NC
2.TXD 7.NC
3.RXD 8.NC
4.NC 9.NC
5.GND
