Multi-Room Music System
10
Operation Instruction to Host
1. Description of Power-On State and Main Interface
After connecting the system line properly, switch on the power of this equipment, turn on the power
switch on the front panel of the host (Refer to the description of the front panel), and the system enters the
power-on state, which will cost approximately 30 seconds. After that, it will enter the main interface as
shown in the figure below:
The main interface is divided into the three regional functions including Time display, system setting, and
zone control;
Time display: To display the date and time, which shall be modified by the system setting.
System setting: Including 12 functions such as time, language, background, timing, infrared study,
network module setting, line output, network detection, SD/USB program source edition, network
radio edition, other settings, and system upgrading (As shown in figure below).
Setting of 8 zone: To control the sound source and volume of the zone.
Time display
Control of eight zone
Setting
