1
2
3
PACKING LIST
SET UP AND OPERATION
SAFETY INSTRUCTIONS
1
2
3
4
5
6
7
U
S
E
R
M
AN
U
AL
user manual
speaker
Please read the instructions carefully before installation and
use. Keep the manual safe for future reference.
Prior to installing the speakers into any ceiling or wall, check
the structure for weight bearing ability and avoid contact
with any wiring or plumbing that might be behind the surface
area. Installing on soft materials or in areas incapable of
supporting the speakers’ weight may cause personal injury
or damage to the speaker. When installing this series
speakers outside, choose areas such as the underside of
eaves to avoid strong direct sunlight which may affect the
color and life of the speaker enclosure.
When placing the speakers on a wall or shelf, it is
recommended that speakers be installed at the level of the
ear or slightly higher.
Damage to the woofer and tweeter may occur if the speaker
is dropped or hit - resulting in no sound or distorted sound.
Use only approved and certified wiring in your installation, do
not stretch or place the wire in contact with sharp objects.
Never overdrive your speakers to the point of distortion and
always reduce volume prior to switching input sources
(e.g.: FM to CD).
Turn off the power to the speaker when unused for long
periods of time.
To tilt the speaker, loosen the adjustment screw found on the
bracket. Tilt the speaker to the desired position and tighten
the screws securely.
This series speakers can be used as hanging ceiling, wall
mounted or as floor speakers. Model HS-3404/HS-3504 can
rotate 360 ° up and down while hanging or in wall mount
position.
NOTE:
HS-3604 is not recommended to rotate
after installation due to its weight.
8
9
Hanging Mount Accessories
Optional Wall Mount Accessories
top cover
eye bolt & nut
hanging cable
carabiner X2
screws X2
screws X4
UV resistant cap
adjustable stand
(for 4''/5
.
25'' speaker)
(for 6.5'' speaker)
buckle part
buckle part
1 2
+ -
-
+
-
+
1 2 3 4
+ + - -
1 2 3 4
+ + - -
1 2 3 4
+ + - -
-
+
-
+
1 2
+ -
1 2
+ -
For 4" Speakers (from power amplifier to next speaker)
For 5.25"/6.5" Speakers (from power amplifier to next speaker)
Connections (For Speakers with Transformer)
Ensure that the speaker is unplugged from the mains before making
any connections.
1
Connect the wires from the amplifier (or the previous speaker)
to the supplied terminal block of the speaker, and ensure red wire
to “+” and black wire to “–“. Attach the top cover to the speaker.
2
Note:
If mounting to the wall with the mounting bracket, mount
the bracket using the appropriate hardware and securely attach
to the wall.
Fasten the provided eye bolt to the top cover and speaker.
3
Route the speaker cable hanging from the ceiling area through
the top cover, and dress the cables to the wire rope using plastic
cable ties, strip the ends of the cables approximately 1/8" to
3/16" and, if the wire is stranded, twist the strands.
Fix the buckle part
for tangle-free cable
.
(
Available for purchase separately.)
