26
2.7 System setting
2.7.1 Main unit setting
Please insert Admin card to the main unit before setting, or user can not change the
setting of main unit.
There are four function keys on main unit:
MENU, (LEFT), (LEFT), ENTER
a. System mode setting:
System support six modes setting by main unit (FIFO 1, FIFO 2, FIFO 3, LIMIT 1, LIMIT
2, LIMIT 3), user can set these mode by
LEFT
&
RIGHT
. System will save and keep the
last setting mode automatically.
* Chairman only: When chairman microphone priority button is put on, the chairman
microphone is turn on while the delegate microphone being turn off until the priority
button is released.
b. System parameter setting
Press
MENU
to enter “SYSTEM VOLUME” (30 Levels) setting interface, and press
MENU
again to enter “LCD CONTRAST” (43-63 Levels) setting interface. User can set
the levels by
LEFT
&
RIGHT
. System will save and keep the last setting automatically.
Press
MENU
again to enter project setting.
c.
Project setting:
1) SYSTEM MIC: [1~128], we strongly commend set the system number same as real
number. (Microphone responding time will influenced by system number setting). User
can set the system microphone number by
LEFT
&
RIGHT
2) DCH (Data Channel): [1~14], default setting is CHANNEL 1. Microphone data channel
must same as main unit data channel. Please set different data channels of each
system if two or more system installed at the same place or building, in order to avoid
influence. User can set DCH by
LEFT
&
RIGHT
3)
DTX (Data Transmit Consumption): [MAX/MID/MIN], default setting is MAX. Please
set the DTX according to the room size. Microphone DTX must same as main unit DTX.
User can set DTX by
LEFT
&
RIGHT
* Above project setting will save automatically after
ENTER
to confirm, user can check
the system version after press “
MENU
” key six times.
