background image

 

4

 

Cleaning: 

 

You can clean the exterior of the unit with compressed air or a damp cloth.  

 

Don’t clean the unit using solvents like trichloroethylene, thinners, alcohol, or other volatile or flammable fluids. 

 

Non use periods: 

The unit AC power cable should be unplugged from the outlet if it’s unused for long periods. 

 

Objects or liquid entry into the unit: 

Be careful that no objects fall into the unit or that no liquid is spilled inside the unit through ventilation openings.  

 

Safe power line use: 

 

Hold the plug and the wall outlet firmly while disconnecting the unit from AC power. 

 

When the unit will not be used for a long period of time, please unplug the power cord from AC power outlet.  

 

To avoid power cable damage, don’t strain the AC power cable and don’t bundle it.  

 

In order to avoid damage to the unit's power cable,  be sure that the power cable is not walked on or pinched by 
heavy objects.  

 

Unit relocation:

  

Before  relocating  the  unit,  please  control  the  unit  is  turned  off.  The  power  cord  must  be  unplugged  from  the  wall 
outlet, and all the connecting cables should be disconnected as well. 

 

Do not open this unit:  

Do  not  attempt  to  open  or  repair  this  unit  yourself.  For  any problem  not  described  in  this  owner’s manual,  please 
refer to qualified personnel only or consult us or your National Distributor. Any improper operation could result in fire 
or electric shock. 

 

Damages requiring services: 

 

Do not attempt to perform operations not described in this user’s manual.  

 

In the following cases please refer to an authorized service center or skilled personnel:  

- When the unit works improperly or it doesn’t work at all.  
- If power cord or plug is damaged.  
- If liquid has spilled, or objects have fallen into the unit.  
- The unit has been exposed to rain.  
- The unit doesn’t operate normally or exhibits a marked change in performance.  
- If the product has been dropped or has been damaged in any way.  

 

Maintenance:  

The user shouldn’t attempt maintenance not described in this user’s manual.  All maintenance should be performed 
by qualified personnel only. 

 

IMPORTANT SAFETY INSTRUCTIONS:  

 

Install this unit following owner’s manual instructions.  

 

Do not install, connect or disconnect  power  supply when the unit is powered,  otherwise there is a high risk of 
electric shock.  

 

Do not open the unit, there are no user serviceable parts inside.  

 

If you detect a particular smell from the unit, please immediately turn it off and disconnect the AC power cord.  

 

Don’t block the unit's ventilation openings.  

 

Avoid using this unit in overload for a long period.  

 

Don’t force commands (switches, controls, etc.)  

 

To obtain good speaker wire contact, please tighten the screw terminals firmly. 

 

 

For safety reasons, do not defeat the grounding connection. Grounding is for user safety. 

 

Use only connectors and accessories suggested by the manufacturer. .  

 

This unit should be fitted in an equipment rack (see INSTALLATION) and kept far from:  

  Wet places  

  Direct exposure to heat sources (like sun light) 

  Improperly ventilated places 

 

Disconnect the power cord during storms or when the unit is not in use. 

 

   In order to prevent fire and reduce risk of electric shock, it is necessary to keep the unit far from dripping 

water. Please don’t put cups, vases or other object containing liquids over the unit. In case of interference from 
source signal, THD value will raise over 10%. Don’t place this unit in a bookshelf or in other enclosed spaces.  

 

We are not responsible for any damage that occurs due to a incorrect installation of the unit. 

 

 
 

Summary of Contents for H-08EX



















Reviews: