7
Rear Panel Controls
3
.
LINE OUTPUTS
4
.
TRIM CONTROLS
5
.
SIGNAL INPUTS
6
.
TALKOVER SWITCH
7
.
PHANTOM POWER SWITCH
These LINE output blocks can be connected to the input of a power am-plier.
These controls allow to accept variable input level. They have 44dB adjustable range as -50dB to -6dB
for microphone input channels and -30dB to +14dB for line input channels.
This amplier provide several connectors for signal input and these con-nectors allow easy connection.
The channel 1~4 are balanced line and microphone input and channel 5~8 are mono line input.
All other input signals are muted by the input signal of channel 1 auto-matically when this switch
pressed on.
The phantom power can be provided to each microphone input for using condenser microphone.
8
.
EXT.MUTE
Mutes input signals fed to CH1~CH4 employing muting function by short-circuiting at these terminals.
9
.
DC 24V INPUT & LINK TERMINAL
If connected to DC 24V.These terminals are provided for the connection of 24V DC power source.24V
DC battery source can be connected to these terminal.The device will supply power to other device by
the link output terminal.
10
.
REMOTE MIC INPUT
This RJ 45 Jack allow to connect EM-4(desktop remote microphone) for individual zone annauncement.
