LXNAV V7, Manual

Page: 8 / 39

V7 Version 1.96 Januar 2012
Page 8 of 39
 Speed to fly indication.
 TE compensation can be selected to be either pneumatic TE probe or electronic TE.
3.1.2 Interfaces
 GPS port input/output on RS232 level (Standard IGC RJ11 connector)
 PDA port input/output on RS232 or TTL level for PNA devices (RJ45 connector)
 Audio port (Standard 3mm phono jack)
 1Mbit CAN bus for extension to V7D repeater
3.1.3 Options
3.1.3.1 External Options
By using a CAN bus system a second seat device can be connected. The unit installed in the
rear seat of the glider is independently powered and receives all necessary data from the
main unit. The communication between both units is exclusively via the CAN bus system.
3.1.4 Technical Data

Power input 10-16 V DC
 Consumption of LXNAV V7 at 12 V:
o
120 mA - minimum brightness without audio.
o
180 mA - maximum brightness without audio.
 Consumption of LXNAV V7D at 12 V:
o
90 mA - maximum brightness without audio.
 57 mm (2¼") standard aircraft cut-out for the LXNAV V7 vario unit; length 95 mm (not
including connector).
 Weight 330 g