Rev #17
Version 1.18
November 2019
Page 9 of 22
4
System Description
4.1
Switching on the Unit
Unit is switched on automatically, when it gets valid power supply from either PORT1 or PORT2 RJ45
connector.
4.2
Normal operation
PowerMouse goes into normal operating mode, when it receives signals from enough GPS satellites.
Then the device becomes visible to and receives data from other FLARM devices.
4.3
Bluetooth
To connect to the PowerMouse via Bluetooth, you must search on a PDA/Smartphone for Bluetooth
enabled devices in range. Click PAIR or CONNECT to connect to the PowerMouse. Device will appear
as LXNAV-FPM-(5-digit serial).
Device doesn’t require any pairing password.
Bluetooth is always ON and cannot be configured. Purpose of Bluetooth is to send Flarm objects to
the other Bluetooth device. When device is on Bluetooth LED will flash blue every 3 seconds, when
device is successfully connected in will flash twice every second.
