LXE MX5X, Reference Manual

Page: 182 / 296

Summit Client Configuration 165
E-EQ-MX5CERG-D MX5X Reference Guide
Ping Timeout 5000
Ping Delay ms 1000
LED Off
Hide Passwords
Off
Admin Password Blank
Auth Timeout 8 sec. (not available in all versions)
Certs Path System
CCX Off
WMM Off
Tray Icon
On
Global Parameters
Parameter Default Function
RX
Diversity On-start
on Main How to handle antenna diversity when receiving packets from the
Access Point.
Options are: Main Only (use the main antenna only), Aux Only
(use the auxiliary antenna only), On-start on Main (on startup, use
the main antenna), or On-start on Aux (on startup, use the auxiliary
antenna).
TX
Diversity On How to handle antenna diversity when transmitting packets to the
Access Point.
Options are: Main only (use the main antenna only), Aux only (use
the auxiliary antenna only), or On (use diversity or both antennas).
Preamble Auto The type of network header, or preamble, for packets. (Not
available in all versions)
Options are: Auto, Short, or Long.
G Short
Slot Auto 802.1x short slot timing mode. (Not available in all versions)
Options are: Auto, On, or Off. Note The G Short Slot parameter
has no effect on the Summit client device.
This option is always set to On regardless of the parameter setting.
This parameter is not present in some versions of the SCU.
Roam
Trigger -65 dBm If signal strength is less than this trigger value, the client looks for
a different Access Point with a stronger signal.
Options are: -50 dBm, -55, -60, -65, -70, -75, -80, -85, -90 dBm or
Custom.
Roam Delta 10 dBm The amount by which a different Access Point signal strength must
exceed the current Access Point signal strength before roaming to
the different Access Point is attempted.
Options are: 5 dBm, 10, 15, 20, 25, 30, 35 dBm or Custom.