RX Diversity
RX Diversity
How to handle antenna diversity when receiving packets from AP.
Options:
Main Only (use main antenna only)
Aux Only (use aux. antenna only)
On-start on Main (On startup use main antenna)
On-start on Aux (On startup use aux antenna)
Default:
On-start on Main (802.11b/g radio)
Main Only (802.11a/b/g radio)
The value for this parameter should be set as follows:
Antenna Configuration
RX Diversity
A Main and BG Main
Main Only
A Main and A Aux
On-start on Main
BG Main and BG Aux
On-start on Main
A Main only
Main Only
BG Main only
Main Only
Frag Thresh
If the packet size (in bytes) exceeds the specified number of bytes set in the fragment threshold, the packet is fragmented
(sent as several pieces instead of as one block). Use a low setting in areas where communication is poor or where there is a
great deal of radio interference.
Options:
256 to 2346
Default:
2346
E-EQ-MX3PLUSRG-J [ 201 ] MX3Plus Reference Guide
