LXE MX1-IS, Reference Manual

Page: 44 / 164

34 Installed Software
MX1 I-Safe Reference Guide E-EQ-MX1ISRG-F
Software Loaded on Drive C
The software loaded on the MX1-IS computer consists of BIOS, Card and Socket Services,
PCMCIA card drivers, utilities, DOS 6.22, a protocol stack for 2.4 GHz radio support, radio
drivers, and an LXE terminal emulator.
The software supported by the MX1-IS is summarized below:
LXE Terminal Emulations
The following Terminal Emulators are available:
•
ANSI Plus 2.4 GHz Terminal Emulator
•
ANSI Plus 900 MHz Terminal Emulator (Obsolete)
•
DOS LDS Plus 900 MHz Terminal Emulator (Obsolete)
•
DOS LDS Plus 2.4 GHz Terminal Emulator
•
DOS IBM 3270 900 MHz Terminal Emulator (Obsolete)
•
DOS IBM 5250 900 MHz Terminal Emulator (Obsolete)
•
TN3270 2.4 GHz Terminal Emulator
•
TN5250 2.4 GHz Terminal Emulator
•
LDS and ANSI 900 MHz Terminal Emulators (Obsolete)
•
LDS and either 3270 or 5250 900MHz Terminal Emulators (Obsolete)
•
LDS Plus and TN3270 or TN5250 2.4GHz Terminal Emulators
•
LDS Plus and ANSI Plus 2.4GHz Terminal Emulator
•
ANSI Plus and either 3270 or 5250 900MHz Terminal Emulators (Obsolete)
•
ANSI Plus and either TN3270 or TN5250 2.4GHz Terminal Emulators
Note: The 900MHz radio is obsolete. Terminal emulators requiring 900MHz radios are
obsolete as of June 2005 (e.g. 3270 DOS TE, 5250 DOS TE).
Datalight Sockets TCP/IP Stack
Used for Communication protocol in 2.4 GHz environments.
ROM-DOS Version 6.22
DOS Version 6.22 files are loaded in the DOS subdirectory. Only those DOS files required for
optimum performance are loaded on the MX1-IS.
PCMCIA
Used for PCMCIA card management. The following file types are resident in the MX1-IS.
•
Socket Services
•
Card Services
•
PCMCIA SRAM MTD
•
PCMCIA ATA MTD
Radio Drivers
Only one radio is installed in the MX1-IS at any one time. The radio resident on the MX1-IS
determines the radio card drivers (900 MHz or 2.4 GHz) installed in the MX1-IS.