
Vehicle Supply
Wire
Color
+9 - 60VDC (DC
+)
White??
Return (DC -)
Black??
Vehicle Chassis
GND
Green??
4. Provide mechanical support for the cable by securing
it to the vehicle structure at approximately one foot
intervals, taking care not to over tighten and pinch con-
ductors or penetrate outer cable jacket.
5. Connect the adapter cable to the Thor Quick Mount.
6. Plug the vehicle cable into the adapter cable.
7. Flip the power switch on the back of the Quick Mount
to On.
VX6 / VX7 Adapter Cable
An adapter cable is available to attach the Thor to a vehicle
previously equipped with a VX6/VX7 DC power cable. The
adapter cable has a connector to match with the VX6/VX7
power supply cable on one end and a connector to match to
the Thor on the other.
Caution
Because the Thor supports 9-60 VDC
power input, verify input voltages before
using this adapter cable with an existing
VX6 or VX7 power connection
installation.
When this adapter cable is used, there is no provision for an
ignition switch input. Therefore the Auto On (with vehicle
ignition) is not available when using this cable.
Need to add How To when cable is ready??
Connecting an AC/DC Power Supply
Note: The LXE-approved AC Power Supply and
Adapter Cable are only intended for use in a 25ºC
(77ºF) maximum ambient temperature environment.
Placeholder for graphic when avail-
able??
In North America, this unit is intended for use with a UL
Listed ITE power supply with output rated 12 – 80 VDC,
minimum 15W75W . Outside North America, this unit is
intended for use with an IEC certified ITE power supply with
output rated 12 – 80 VDC, minimum 15W75W .
The external power supply may be connected to either a
120V, 60Hz supply or, outside North America, to a 230V,
50Hz supply, using the appropriate detachable cordset. In all
cases, connect to a properly grounded source of supply
provided with maximum 15 Amp overcurrent protection (10
Amp for 230V circuits).
1. Turn the Thor off.
2. Connect the detachable cordset provided by LXE (US
only, all others must provide their own cable) to the
external power supply (IEC 320 connector).
3. Plug cordset into appropriate, grounded, electrical
supply receptacle (AC mains).
4. Connect the DC Output Cable end to the power con-
nector on the Thor Quick Mount.
5. Turn the Thor on.
E-EQ-THORCEOGWW-A [ 12 ] Thor CE User Guide
For
ENG/CERT
Review
-
Not
for
Distribution
or
Publication
-
Draft
03