E-EQ-BRSCHGROGWW-B
Bluetooth Ring Scanner Battery Charger User’s Guide
Installation and Operation
Overview
The life and capacity of a Lithium Ion battery can vary significantly depending on the discharge
current and the environment in which it is used. As with all batteries, expect to see a reduction in
the total number of operations a fully charged battery pack can deliver as it ages.
Charging times may increase but will not exceed three hours. Battery packs do not need to be fully
discharged between charge cycles.
Normal Operations
The optimal operating temperature range for the chargers is between 0°C (32°F) and 40°C
(100°F). While charging, the charger and battery pack will generate enough heat to feel warm.
This is normal and does not indicate a problem.
Do not store the battery pack in direct sunlight or anywhere the battery pack cannot cool down. If
the battery pack is hot after removal from the Bluetooth Ring Scanner, allow it to cool at room
temperature before placing it in the charger.
Charge times may increase significantly if the battery is warm or hot, since it takes the battery
pack longer to cool down while in the battery well. If the battery pack is hot from severe
environmental use and immediate recharging is necessary, place the battery pack in a cool air
stream or in a cool location until it is no longer warm to the touch before charging.
Do not place or store the Single-bay Charger or the Multi-Charger in hazardous locations.
Warning:
The Bluetooth Ring Scanner Multi-bay Charger is to be used to charge
an I.T.E. Recognized Battery pack manufactured by Helix Co., Ltd.
(Model: HNP-40, LXE, P/N 161987-0001, rating 3.7V, 750mAh).
Charging any other type of battery pack in the Bluetooth Ring Scanner
Multi-bay charger is prohibited.
Warning:
Use the provided AC power supply, only, with the Bluetooth Ring
Scanner Multi-bay Charger. Using any other type of AC power supply is
prohibited.