LX 10k
Connectivity
Document name:
LX 10KUM
Document revision:
R1
6.2.1.2
Setting up the LX 10k
To set up LX 10k NMEA communication, needed for the proper functioning of XC Soar, go to
Setup
>
NMEA
and check the following tick boxes:
•
GPGGA
•
GPRMC
•
GPRMB
•
LXWPx
•
LXDT
•
LXBC
•
PFLAx
Your LX 10k will now send the checked NMEA sentences to the Android phone.
6.2.1.3
Setting up XC Soar
Open XC Soar on your phone, go to
Config
>
Devices
>
B:
>
Edit
and set up the following items:
•
Port -
select the port with the same name as your LX 10k’s Bluetooth name (LX LX 10k
3xxxx)
•
Driver -
LX navigation (pending)
•
Passthrough device -
Off
Once done, you should see the connection state go from ’Not connected’ to ’Connected; Baro;
Airspeed; Vario; FLARM’.
Now the two devices are communicating.
6.2.2
Connecting an Oudie or other PNA/PDA device
In order to connect an Oudie, or similar PDA/PNA device, the following steps are required:
1.
Establishing a Bluetooth connection
2.
Setting up the LX 10k
3.
Setting up the Oudie
6.2.2.1
Establishing a Bluetooth connection
To set up a Bluetooth connection, go to
Setup
>
Network
>
Wireless mode
and choose
Bluetooth server
.
Exit the
Wireless mode
setup by going back and open the
Wireless setup
menu. You will find
your device’s Bluetooth name and password, needed fro establishing a Bluetooth connection.
Now take your Oudie, go to
Menu
>
Settings
>
Input
>
Bluetooth...
and press Lookup. The
Oudie will now search for nearby Bluetooth devices. Once your LX 10k appears (LX LX 10k
Device manual
Public
79
Summary of Contents for LX10K
Page 1: ...LX10K user s manual...
Page 108: ......
