LX Navigation Era 57, User Manual, Page: 71 / 98

LX Era
Device setup
Document name:
LX EUM
Document revision:
R1
NOTE
If you are connected to a WiFi network, it is displayed under the ’Connected’ list.
Pressing on the connected network will make the device disconnect from this
network.
5.2.7 Localisation
Contains information regarding the local settings of the Era. In this setup menu the language
of the device can be set (at this moment on English and Slovene are available, more to come).,
Timezone and a check box for daylight saving time.
5.2.8 Synchronisation
The synchronisation setup is reserved for devices in double-seater configuration, when a front
and back (main and repeater, also known as master and slave) unit exists.
This Setup page allows the pilot to utilize the following options:
•
Sync on change -
will sync all navigation points (TP, APT and TSK), whenever the front
seat unit changes a navigation point, to the back seat unit. Is bidirectional (can also send
from second seat unit to front seat unit, if selected on the second seat unit).
•
Sync TP now -
will send the current tunrpoint chosen on the main unit’s TP navigation
page to the repeater unit. Is bidirectional (can also send from second seat unit to front
seat unit, if selected on the second seat unit).
•
Sync APT now -
will send the current airport chosen on the main unit’s APT navigation
page to the repeater unit. Is bidirectional (can also send from second seat unit to front
seat unit, if selected on the second seat unit).
•
Sync task now -
will send the current task chosen on the main unit’s TSK navigation page
to the repeater unit. Is bidirectional (can also send from second seat unit to front seat
unit, if selected on the second seat unit).
•
Sync database -
will send the
active
database files from the
Transfer
setup menu of the
front to the back seat unit.
Device manual Public 71