HOLD FUNCTION
1) Place the item on the Scale platform.
2) Wait for the stable weight to be displayed.
3) Press the HOLD key. The "
.
" hold indicator will turn on.
4) Remove the item from the Scale platform, the item's weight reading will remain on the display. Now you
can also select units by pressing [UNIT] key.
Quit HOLD function: Once an item is weighed and the hold function is enabled, you want to quit HOLD
function, press the HOLD key again to cancel the "
.
" hold indicator and return the Scale to weighing mode
FUNCTION SETTINGS
Bluetooth reconnect
When reconnecting, make sure that only the one to be connected is turned on
within 5 meters, and other Bluetooth devices are turned off.
1. Press the power switch of the scale body to turn on the scale.
2. Press and hold the [PRINT] key and then press the [ON/OFF] key to turn on
the indicator, the display will show “.CLEAr”
3. Press the [ZERO] key, and the display will display "-----". “CLEAr ",wait for 3~5
seconds, and the Bluetooth red LED on the indicator and the scale changes from
flashing to constant light, indicating that the indicator and the scale are
successfully connected by Bluetooth.
4. If you don't replace the meter head or scale body, just reconnect it with Bluetooth,
and restart it to use it. If the meter head or scale body is replaced, calibration is required
