MagniLink Zip
12
User Manual 7943529c | MagniLink Zip
7
Use
7.1
Panel
1.
Power on/off with LED
Press to start or shut down the system. Press for more than six
seconds to do a reset. A green light indicates that the unit is on. A
flashing yellow light means that autofocus is switched off. The light
flashes green when the system is starting. A red light for five
seconds when the system is starting indicates that the battery
needs to be charged. If the unit was on when the battery started
to be charged, the LED flashes yellow every five seconds.
2.
Magnification control
Used to set the magnification. To reduce the magnification, turn
anticlockwise and to increase the magnification, turn clockwise.
Press the button to reduce the magnification to overview mode.
Press the button again to restore the magnification.
3.
Picture mode
Press the button to switch the picture mode between natural
colours and grey scale.
4.
High contrast mode with artificial colours
Press the button to switch between the various colour
combinations.
5.
Function control
In normal mode, this control is used to set the light level. When
the controller is pressed down, you enter a menu in which further
settings can be made.
