MagniLink S - Mac
User Manual 7943541a | MagniLink S - Mac
21
Press fn + Alt + Shift + F5 to start video recording at once,
without specifying file name and folder. This command will
quick save the video to the MagniLink folder or to the last
folder that was used.
fn + F6
View stored snapshots
Press fn + F6 to view stored pictures. Mark the picture and
press Enter or choose open. The picture is normally opened
in the standard Mac picture-viewing program, where you
can, for example, magnify the picture.
fn + Shift + F6
View last stored snapshot – fast
Press fn + Shift + F6 to open the last saved snapshot. If no
snapshots have been saved during this program cycle, the
functionality will be the same as for fn + F6.
fn + Alt + F6
View stored videos
Press fn + Alt + F6 to view recorded video sequences. Mark
the video to view and press Enter or choose Open. The
video is opened in the standard video viewer.
fn + Alt + Shift + F6
View last stored video – fast
Press fn + Alt + Shift + F6 to open the last saved video
recording. If no video recording have been saved during
this program cycle, the functionality will be the same as for
fn + Alt + F6.
fn + F8
Preset split modes
Press fn + F8 to toggle among the preset split modes. If
multiple monitors are used, the split modes will toggle over
all monitors, starting with the primary monitor. The window
can also be controlled using the mouse or the standard
Mac OS X commands.
fn + Alt + F9
Information and settings window
Pressing fn + Alt + F9 opens up a window in which you can
adjust different settings and optimize your MLS. The
window contains different headings.
fn + Alt + F11
Return to default settings
Press fn + Alt + F11 to return to the default settings (normal
window, natural colours and normal brightness).
Arrow up
Zoom in
Arrow down
Zoom out
Alt + O
Overview
Switches to an overview mode. The camera zooms out and
a sight is shown in the middle of the video window. To exit
overview mode, press the key combination again.
