7938619e_User’s manual MLS Student Addition
19
Functions from the control box:
A. Option 1. On/Off
Option 2. Monitor switch*
(this button is only used when there is an
external monitor connected to the system)
B. Control of
zoom
(+,-)
and contrast
range
(arrows)
C. Natural colors
D. Artificial
colours
Press the A button to change between
the colours
E. Guiding line
*There are two different external monitor modes to change between. The system
starts in VGA mode (factory default). To change mode, press and hold the button for
4 seconds until you get a picture on the TV set. This new mode will be saved as
default until it is changed again.
Due to the interlacing and lower resolution used in TV-technique, the picture quality
on a TV-monitor is normally slightly lower compared to the picture quality on a VGA
monitor.
Indication lamp on the system
Yellow light indicates: System is in standby position, power is connected.
Green light flashing indicates: System starts up.
Green constant light indicates: System is up and running.
Red light or flashing yellow light indicates system error. Restart the
system by disconnecting all cables and start the system up again. If
there is still a red light, please contact service technician.
