5
3. Installation
Please, open the packing box and check the packing list, then examine the parts
according to the packing list.
3.1 Installation of chair back (Fig. 1)
1.
Remove M8 bolts form the support of handrails at left and right sides.
2.
Remove stop bloke. Put the end of the fixed screw, which is in the low side
of the chair back, into the support of hand rail, then put the another end of the
fixed screw into it. Please put the screw in the center of the installation hole.
3.
Insert the M8 bolts at the left and right sides and fasten then.
4.
Install the covers for support of handrail.
Fixed screw Stop block Cylinder
seat
Fig 1
Cover Chair back
Summary of Contents for RU-1000
Page 1: ......
