luxvision LCP-7800, User Manual

Page: 8 / 37

7
P
E
d ]
7
[
1
=
800MHz to 2.5GHz
Where P is the maximum output power
rating of the transmitter in watts(W)
according to the transmitter manufacturer
and
d is the recommended separation
distance in metres (m).
Field strengths from fixed RF transmitters,
as determined by an electromagnetic site
survey, should be less than the compliance
level in each frequency range.
Interference may occur in the vicinity of
equipment marked wigh the following
symbol:
Recommended separation distances between portable and mobile RF communications equipment
and the
LCP-7800
The
LCP-7800
is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the
LCP-7800
can help prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile RF communications equipment
( transmitters ) and the
LCP-7800
as recommended below, according to the maximum output power of
the communications equipment.
Rated maximum
output power of
transmitter
W
Separation distance according to frequency of transmitter
m
150kHz to 80 MHz
P
V
d ]
5 . 3
[
1
=
80MHz to 800MHz
P
E
d ]
5 . 3
[
1
=
800MHz to 2.5GHz
P
E
d ]
7
[
1
=
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23