01
Open lid on the tank and
remove all contents from the
inside.
03
Attach black cover to back of the
gun.
06
Attach black spray cover to front
of the gun.
To install nozzle of your choice;
hold
white cross ring
and twist nozzle on
by the black base. DO NOT twist top
of the nozzle. Hand tighten to avoid
leaks.*
04
Install green washer on
nozzle end of gun. Two may
be used, if needed.
SETUP
02
Insert white cylinder filter inside
the tank - just push into the hole.
07
If battery is not installed, open
door on tank and connect red
and black wires to the
terminals.
08
To charge battery, plug in power adapter to
tank.
Red
= charging;
Green
= done.
Upon first usage it is recommended to charge
overnight regardless of light indicator color.
09
Insert so white
tank cap and turn on
electrostatic switch on the tank
to start. Use switch on gun to
turn on extended fan or mist.
ELECTROSTATIC BACKPACK
*Make sure to firmly hold the white cross ring at the gun tip while installing nozzle (and also when removing or switching nozzles). Nozzles should only be tightened by the base of the
nozzle (black in color). Twisting the tip of the nozzle may cause damage. You can however lightly tighten the
three nozzle heads of the metal nozzle if you are experiencing a stream spray effect.
Ver. 06.21
2 of 4