background image

LUX-UG-XGS-1024

092111109

357 South 670 West  |  Suite 160  |  Lindon, UT 84042

p: 801-822-5450  |  f: 801-822-5460

Information on this document supersedes all previous versions.
Products and documents subject to change without notice.
Products may be discontinued without notice.

luxul.com

it is advised to verify that the adjacent equipment is not adversely affected.

Power Supply: Use only a Luxul approved power supply output rated at 100-240VDC 
and minimum 0.1A. The power supply shall be Listed to UL/CSA 60950-1; and 
certifi ed to IEC60950-1 and EN60950-1 with SELV outputs. The device can also 
be powered from a compliant POE source. Use of alternative power supply will 
invalidate any approval given to this device and may be dangerous.

5.2 FCC Statement:

 

This equipment has been tested and found to comply with the limits for a Class 
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference in a residential 
installation. This equipment uses and can radiate radio frequency energy, and if 
not installed and used in accordance with the instructions may cause harmful 
interference to radio communications. However; there is no guarantee that in-
terference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined 
by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

 

Reorient or relocate the receiving antenna.

 

Increase the separation between the equipment and receiver.

 

Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected.

 

Consult the dealer or an experienced radio/TV technician for help.

6: CONTACT LUXUL

For sales questions 

please contact our 

Sales Department

P: (801) 822-5450
E: [email protected]

If you experience any 

problems, please contact 

Technical Support

P: (801) 822-5450
E: [email protected]

Summary of Contents for XGS-1024













Reviews: