Pro-WAV™ DIPoLE rAngE ExtEnDEr KIt - QUICK InstALL gUIDE
Congratulations on your purchase of the Luxul Pro-Wav Range Extender Kit! You are just
minutes away from enjoying the benefits of a farther reaching, clearer wireless signal in
your home or office.
This Luxul Pro-Wav Range Extender Kit (model #PWK1-24-1WFP7) consists of the following:
• One 5 dBi dipole omni antenna
• One Shock-WAV™ WiFi Signal Booster (1 Watt)
• One power supply for the WiFi Signal Booster
• 24” N-Male to RP-SMA cable
• One RP-SMA to RP-TNC adapter
Please make sure all the parts have been included in your shipment.
Now you’re ready to begin.
seT-up procedure
NOTE:
Disconnect all power before connecting or disconnecting any cables or coax
to or from this device. Failure to do so will void your warranty.
1. Connect the dipole antenna directly to the Shock-WAV WiFi Signal Booster by
turning it in a clockwise motion until it stops. Do not over tighten. Be sure to
connect the X-WAV antenna to the side of the Shock-WAV WiFi Signal Booster
labeled “Antenna”.
2. Ensure that your wireless access point (WAP) has a removable antenna.
3. Remove (usually unscrew) the stock antenna(s) from your WAP or router.
4. Using the included cable (and the RP-SMA to RP-TNC adapter if necessary), connect
the Shock-WAV WiFi Signal Booster to the WAP. Be sure to connect the WAP to the
side of the Shock-WAV WiFi Signal Booster labeled “Radio”.
You’re now ready to provide power to and deploy your Pro-WAV Range Extender Kit.
deploymenT
For best results, the Kit should be deployed where the maximum amount of signal can be
sent throughout the desired coverage area.
Luxul wireless products, particularly those implementing our patented booster products,
are often capable of emitting enough signal strength to cover an entire home regardless
of orientation. However, for best results, the below deployments are suggested. Please
refer to the diagrams below for examples of proper antenna deployment.
