Pro-WAV™ DIPoLE
rAngE ExtEnDEr KIt
QUICK InstALL gUIDE
Results may vary depending on building layout, type of construction and other environmental
factors; including WiFi traffic, microwaves, cable length and type, etc.
FCC NOTICE:
The use of all radio equipment is subject to regulations in each country. To comply with FCC part 15
rules in the United States, radio equipment must only be used in systems that have been FCC certified. It is the responsi-
bility of the user/professional installer/operator to ensure that only approved equipment/systems are deployed.
LUXUL WIRELESS | 357 South 670 West, Lindon, UT, 84042
p: 801-822-5450 f: 801-822-5460
www.luxulwireless.com
LUX-QIG-111420081103-PWK2
© 2008 Luxul Corp. All rights reserved.
TroubleshooTing
Weak or non-existent coverage.
1. Make sure the cables are properly connected and that there is power to the Shock-
WAV WiFi Signal Booster.
2. Sometimes, WAP’s with multiple antennas have primary and secondary antennas.
The secondary antennas often do not receive or transmit with the same amount
of power as the primary. If your WAP has more than one port, try connecting to a
different port.
3. While Luxul products work with almost every commercially available wireless
radio, some low-cost products do not offer the same results as higher-end models.
This can be due to power fluctuations by the WAP, which can confuse the Shock-
WAV WiFi Signal Booster and prevent it from properly boosting the signal.
4. Ensure that the X-WAV antenna is properly positioned. If it is facing away from
the desired coverage area, or there are many obstacles in the way, wireless
coverage may be incomplete. Luxul wireless signals are superior for penetrating
wood, concrete, and stucco, but all wireless signals can be disrupted by certain
obstructions, including large metal objects. Try orienting the antenna where more
line-of-sight access to the desired coverage area is available.
If after checking the above items, your Pro-WAV Range Extender Kit still does not seem to be
functioning properly, please contact Luxul Technical Support at: [email protected]
Model #PWK2-24-1WFP7
