I N S T R U C T I O N S
Multi-Channel Controller
Sleep Mode
Motor head
programming button
Motor head
programming button
It is necessary to “Wake” the motor before operation and setup.
Each battery & plug-in motor comes preprogramed from LuXout Shades. Upon leaving the factory
the motor is placed into “Sleep Mode” to avoid accidental operation during shipping.
WAKE
To “Wake” the motor and exit Sleep Mode, assure the motor is installed and secured in the
mounting hardware.
After the motor is installed in the brackets, press and hold the programming button on the motor head
until the motor jogs up and down once. It is now no longer in “Sleep Mode” and ready for further setup.
* Warning, if you press and release the programming button quickly, the motor will lower to
its lower limit. Be mindful of this during the install process.
SLEEP
If required, to place the motor back into “Sleep Mode” press and hold the programming button
for a period of 6 seconds. Release the button when the motor has jogged up and down twice.
The motor will beep twice to signify “Sleep Mode” has been activated.
Motor head
programming button
Motor head
programming button
Motor Response
HOLD
6
SEC.
JOG
x1
BEEP
x2
JOG
x1
S P E C I F I C A T I O N S U B M I T T A L
Job Name:
Model Numbers:
Job Number:
I-51
1221 Admiral Street Richmond VA 23220 800-817-1204 LuXoutShades.com
LuXout
Shades
