manualshive.com logo in svg

LuXout Shades Multi-Channel Controller, Instruction Manual

Share
Download
LuXout Shades Multi-Channel Controller Instruction Manual Download Page 1

I N S T R U C T I O N S

Multi-Channel Controller

Overview

Multi-Channel Option

Level Control

Touch Sensitive

433 MHz

The LuXout Shades Multi-Channel Controller features a contemporary design with touch sensivite controls. 

Each battery 

and plug-in shade from LuXout Shades will come preprogrammed from the factory. The pre-programming assures the 

remote is paired with the shade, the upper and lower operation limits are set, the remote is locked and the unnecessary 

channels are hidden for ease of use. (15 available)

Features:

• Up to fifteen channel capacity.

• Touch sensitive buttons.

• Slim Magnetic wall mount.

• LCD display.

• Hide unused channel function.

• Levelling control.

• Individual/group contol.

About The Controller

Package Contents

• Remote

• Magnetic holder &

fixing screws

• Instruction Manual

• 3V - CR2450 Battery

S P E C I F I C A T I O N   S U B M I T T A L

 Job Name:

 Model Numbers:

Job Number:

I-47

1221 Admiral Street      Richmond VA  23220      800-817-1204     LuXoutShades.com

LuXout

Shades

LuXout Videos

Summary of Contents for Multi-Channel Controller



















Reviews:

No comments

Brands by name

Popular brands

Load more brands