![background image](http://html1.mh-extra.com/html/luxor/powertools-sbn600/powertools-sbn600_instruction-manual_1952558029.webp)
ENGLISH | 29
• Warning:
If the drill stalls, release the trigger
immediately. Do not click the switch on and off,
this can damage the motor.
• To minimize the risk of stalling and breaking the
material, reduce the pressure on the drill and
ease the bit through the last part of the hole.
• Keep the motor running when pulling out the bit
out of the drilled hole. This will prevent jamming.
METAL DRILLING:
• To maximize the performance, use the high
speed bits for metal or steel drilling.
• Push the drilling mode selector to the drilling
mode.
• Mark the location of the hole on the metal.
• Begin the drilling at a very slow speed to prevent
the bit from slipping off. Increse the speed as the
bit bites into the material.
• Maintain an even pressure and speed that does
not overheat the bit. If you apply too much
pressure the drill will be overheated, the bits
might bend or burn or the hole will be wrongly
shaped.
• When drilling big holes in metal, we recomend
that you use a small bit to start with. Then finish
with a larger bit.
WOOD DRILLING:
• To maximize the performance, use high speed
steel bits for wood drilling.
• Push the drilling mode selector to the drilling
mode.
• Secure the material to prevent it from turning
when drilling.
• Begin the drilling at a very slow speed to prevent
the bit from slipping off. Increse the speed as the
bit bites into the material.
MASONRY DRILLING:
• To maximize the performance, use tungsten
carbidetipped masonry hammer bits when drilling
holes in brick, tile, concrete, etc.
• Push the drilling mode selector to hammer mode.
• Apply light pressure and medium speed for best
results in masonry.
• When drilling in masonry, practice on a scrap
piece to determine the best speed and pressure.
OPERATION
Summary of Contents for POWERTOOLS SBN600
Page 1: ...HAMMER DRILL SBN600 INSTRUCTION MANUAL SVENSKA NORSK ENGLISH...
Page 2: ......
Page 32: ......