![background image](http://html1.mh-extra.com/html/luxor/mw1449/mw1449_installation-and-operating-instructions-manual_1952646015.webp)
Putting Laundry in the Machine
- Open the door of your machine.
- Spread your laundry in your machine.
NOTE: Maximum loading capacity may vary based
on the laundry type you will wash, degree of
contamination and the program you have chosen. Do not
exceed maximum dry loading capacity indicated in the
program table for washing programs.
- Put each item of laundry in separately.
- Ensure that no laundry is stuck between the cabinet and click
rubber seal when closing the door of your machine.
- Push the door of your machine until you hear the locking
sound.
- Close the door of your machine properly, otherwise the
machine will not start.
Adding detergent to the machine
The amount of detergent put into the machine will depend on the following criteria:
- Only use detergents produced specifically for automatic washing machines. The
amount of detergent to be used for your laundry is printed on the detergent packet.
- The higher the degree of hardness of the water the more detergent you need to use.
- Put the fabric softener into the softener compartment of the detergent drawer. Do not
exceed the MAX level.
- Softeners with high density (thick) will need to be thinned before being put into the
drawer. High-density (thick) softeners can clog the compartment and prevent the flow of
the softener.
- You can use liquid detergents in all programs. For this, fit the liquid detergent level
plate found in the accessories bag or the liquid detergent apparatus (*) into the 2nd
compartment of the detergent drawer and set the amount of liquid detergent according
to the levels on this plate. Remember to remove the liquid detergent plate.
0333 3052260
WASHING YOUR LAUNDRY
14