![background image](http://html1.mh-extra.com/html/luxor/led24el/led24el_operating-instructions-manual_1952627055.webp)
English
- 54 -
If the writing speed of the connected USB disk is not
sufficient, the recording may fail and the timeshifting feature
may not be available.
It is recommended to use USB hard disk drives for
recording HD programmes.
Do not plug out the USB/HDD during a recording. This may
harm the connected USB/HDD.
Multipartition support is available. The maximum of two
different partitions are supported. The first partition of the
USB disk is used for PVR ready features. It also must be
formatted as the primary partition to be used for the PVR
ready features.
Some stream packets may not be recorded because of
signal problems, so sometimes video may freezes during
playback.
Record, Play, Pause, Display (for PlayListDialog) keys can
not be used when teletext is ON. If a recording starts from
timer when teletext is ON, teletext is automatically turned
off. Also teletext usage is disabled when there is an ongoing
recording or playback.
Timeshift Recording
Press
(PAUSE) button while watching a broadcast to
activate timeshifting mode.In timeshifting mode, the
programme is paused and simultaneously recorded to the
connected USB disk. Press (PLAY) button again to
resume the paused programme from where you stopped.
Press the STOP button to stop timeshift recording and
return to the live broadcast.
Note: Timeshift cannot be used while in radio mode.
Note : You cannot use the timeshift fast reverse feature
before advancing the playback with the fast forward option.
Instant Recording
Press
(RECORD) button to start recording an event
instantly while watching a programme. You can press
(RECORD) button on the remote control again to record
the next event on the EPG. In this case, an OSD will be
displayed, indicating the programmed events for recording.
Press (STOP) button to cancel instant recording.
Note
: You can not switch broadcasts or view the Media Browser
during the recording mode. While recording a programme or during
the timeshifting, a warning message appears on the screen if your
USB device speed is not sufficent.
Watching Recorded Programmes
Select the
Recordings Library
from the
Media Browse
r
menu. Select a recorded item from the list (if previously
recorded). Press the
OK
button to view the
Play Options
.
Select an option then press
OK
button.
Note: Viewing main menu and menu items will not be available
during the playback.
Press the (STOP) button to stop a playback and return
to the Recordings Library.
Slow Forward
If you press
(PAUSE) button while watching recorded
programmes, the slow forward feature will be available. You
can use
button to slow forward. Pressing
button
consecutively will change slow forwarding speed.
Recording Configuration
Select the Recording Configuration item in the Settings
menu to configure the recording settings.
Format Disk
: You can use Format Disk feature for
formatting the connected USB disk. Your pin is required to
use the Format Disk feature (default pin is 0000).
IMPORTANT
: Note that ALL the data stored on the USB
disk will be lost and the disk format will be converted
to FAT32 if you activate this feature. If your USB disk
malfunctions, you can try formatting the USB disk. In
most cases formatting the USB disk will restore normal
operation; however, ALL the data stored on the USB
disk will be lost in such a case.
Note:
If “USB is too slow” message is displayed on the screen
while starting a recording, try restarting the recording. If you still
get the same error, it is possible that your USB disk does not
meet the speed requirements. Try connecting another USB disk.
Quick Menu
Quick Settings menu allows you to access some options quickly.
This menu includes Power Save Mode, Picture Mode, Equalizer
Settings, Favourites and Sleep Timer options. Press Q.MENU
button on the remote control to view quick menu. See the
following chapters for the details of the listed features.
Media Browser Menu
You can play photo, music, and movie files stored on a USB disk by connecting it to your TV. Connect a USB
disk to one of the USB inputs located on the side of the TV. Pressing the MENU button while in the Media Browser
mode will access the Picture, Sound and Settings menu options. Pressing the MENU button again will exit from
this screen.
You can set your Media Browser preferences by using the Settings Menu.
Loop/Shuffle Mode Operation
Start playback with
and activate
T V p l a y s n e x t f i l e a n d l o o p t h e l i s t .
Start playback with
OK
and activate
t h e s a m e f i l e w i l l b e p l a y e d i n a l o o p ( r e p e a t ) .
Start playback with
OK/
and activate
t h e f i l e w i l l b e p l a y e d i n a s h u f f l e .